|Home||» Products||» Vibrating Finishing Machine||» Vibrating Deburr Machine|
Vibrating Deburr Machine
In conventional deburring process such as chamfering, belt grinding, counter sinking etc. which again creates new burrs, while in vibratory finishing removes the burrs and impart a consistent finish on parts and components. In addition to the deburring process simultaneously vibratory finishing can be utilize for the different applications as finishing, Brightening, Smoothing, polishing, Burnishing, Edge Radiusing, De-rusting, Fine Mark Removing, Cleaning, De-scaling, De-Greasing, De Flashing, Micro Finish Improvements.
Construction & Working Principle
The machine has a steel bowl lined with Poly Butadiene Rubber (PBR) or polyurethane (PU) by hot cast method for preventing the wear of bowl from inside. The bowl is mounted on specially designed springs and the above assembly is mounted on sturdy frame. Inside the bowl, a special heavy duty vibratory motors is mounted which has eccentric weights on both the ends of the shaft The bowl is filled up with required media (either ceramic, plastic, maize etc. depending upon the finish required) and components to be finished. Eccentric weights are mounted on an extended shaft attached to a heavy duty motor to cause vibrations and create a spiral movement of the media and the components. Variations in vibration, achieved by varying weights and angles, and suitable combination of media enable machine to be used for different components.
As polyurethane lining gives wear resistance 4-5 times more than rubber lining is preferred by most of our clients. In some cases, the components having oil on surface, like sintered components, synthetic rubber lining is used.
VFM machines with RD model
Small & medium size parts in large qty mix with media need unmanned separation. RD bowl has inbuilt screen hinged with flapper. In reverse cycle, part & media climb on inserted flapper & proceed on screen. Media fall through the screen in bowl itself and parts exit from the screen. Reverse separation possible for small & delicate parts.
VFM Machine- Standard Model
Process where component are of big sizes can easily separated from media manually .there is no need of separation arrangement. In such cases we suggest our standard models.
VFM Ball Burnishing Machine-
Vibro Equipments also offers special heavy duty series of vibrators to achieve mirror finish on ferrous as well as non-ferrous components. The specially developed steel media and polishing compounds are used to achieve highly glossy surface and mirror finish.
All machines are available in Std. 40 litrs to 800 litrs capacity.Machines can be supplied with pneumatic or manually operated sound cover which reduces the noise level of the machine during operation. Facility can be provided as an optional accessory.
Vibratory Deburring machines are widely used in finishing of Auto components, sheet metal parts, Bicycle parts, surgical & ortho tools, hand tools and in many more other applications.
With our expertise team having an experience of more than two decades in our product line we are providing quality products at most competitive rates.